|
| |
| Interface
Converter |
| |
| Part
Number |
Item
Description |
| PKB-004 |
AT/PS2 Keyboard Emulator |
| COV-004 |
Serial RS-232 to Keyboard Data Converter |
| eCOV-110 |
RS-232 Serial to
Ethernet Converter |
| eCOV-132 |
RS-232/422/485
Serial to Ethernet Converter (Single Port) |
| eCOV-432 |
RS-232/422/485
Serial to Ethernet Converter (Multi Port) |
|
| |
| PKB-004 |
Overview
This compact unit emulates an AT/PS2 compatible
keyboard to interoperate with a notebook PC. When attaching a keyboard wedge scanner
to a notebook PC, the computer may or may not function without the existence of
an external keyboard. In case a physical keyboard is required, the space-saving
emulator is very useful as a replacement for a full-size keyboard. |
 |
|
Specifications
|
|
(Refer to BCK-004)
|
|
|
|
| COV-004 |
Overview
This compact data converter transforms RS-232 data to keyboard data.
It allows an existing RS-232 input device, such as a CCD scanner or a portable data
collector, to interoperate with a standard I/O (keyboard input and screen output)
application running on a host PC.
|
 |
| Specifications
|
(Refer to BCK-004)
|
| |
|
eCOV-110 |
Overview
This compact data converter transforms RS-232 data to
Ethernet data stream.
It enables remote management of RS-232 devices over the internet.
You are able to continue using your existing low cost
serial devices, thus saving you tremendous amount of money on hardware
upgrades. |
 |
| Specifications
|
|
|
|
- CPU: Winbond W78E65P
- Memory: 32KB RAM, 64KB Flash
- Operation Modes: TCP Server, TCP Client, UDP
- Protocols: ICMP, TCP, IP, UDP, DHCP, HTTP
- Management tools: web console, Windows utility,
command line
- One Ethernet port
- Interface: 10/100 Mbps auto sensing
- Signal: ETX+, ETX-, ERX+, ERX-
- Protection: Built- in 1.5KV Magnetic Isolation
|
- Firmware updatable
- One RS-232 port
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Baud Rate: 300 ~ 38400 bps
- Parity: None, Even, Odd
- Data Bits: 7, 8
- Stop Bit: 1, 2
- Flow Control: RTS/CTS, XON/XOFF, NONE
- User's Manual
|
|
eCOV-132 |
Overview
eCOV-132 provides all the functionalities supported by
eCOV-110 plus the RS-422/RS-485 connectivity.
It also features the rugged metal housing intended for industrial
applications. |
 |
| Specifications
|
|
|
|
- CPU: 32-bit ARM-7, 33MHz
- RAM: 2MB
- ROM: 128KB
- Operation Modes: TCP Server/Client, UDP Client
- Protocols: ARP, IP, ICMP, UDP, TCP, HTTP, DHCP,
DHCP, PPPoE
- Dimensions: 110mm x 68mm x 27mm
- Weight: 140 grams
- One digital I/O port
- One Ethernet port (RJ-45)
- Interface: 10/100 Mbps
auto detecting
- Security: Setup and connect password
|
- Setup: HTTP browser
- Firmware updatable
- One RS-232/RS-422/RS-485 port
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Baud Rate: 300 ~ 230.4k bps
- Parity: None, Even, Odd
- Data Bits: 5, 6, 7, 8
- Stop Bit: 1, 2
- RS-232 signals: Rx, Tx, GND, RTS, CTS, DTR, DSR, DCD
- RS-422
signals: Rx+, Rx-, Tx+, Tx-
- RS-485 signals: Data+, Data-
- User's Manual
|
|
eCOV-432 |
Overview
eCOV-432 is the multi-port version of eCOV-132.
It supports one RS-232/422/485 port and three RS-232 ports. |
 |
| Specifications
|
|
|
|
- CPU: 32-bit ARM-7, 33MHz
- RAM: 2MB
- ROM: 128KB
- Operation Modes: TCP Server/Client, UDP Client
- Protocols: ARP, IP, ICMP, UDP, TCP, HTTP, DHCP,
DHCP, PPPoE
- Dimensions: 168mm x 123mm x 27mm
- Weight: 340 grams
- One digital I/O port
- One PS/2 port
- One Ethernet port (RJ-45)
- Interface: 10/100 Mbps
auto detecting
- Security: Setup and connect password
|
- Setup: HTTP browser
- Firmware updatable
- One RS-232/RS-422/RS-485 port and three RS-232 ports
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Baud Rate: 300 ~ 115.2k bps
- Parity: None, Even, Odd
- Data Bits: 5, 6, 7, 8
- Stop Bit: 1, 2
- RS-232 signals: Rx, Tx, GND, RTS, CTS, DTR, DSR, DCD
- RS-422
signals: Rx+, Rx-, Tx+, Tx-
- RS-485 signals: Data+, Data-
- User's Manual
|
|
